​ ​ ​ ​ ​
A SOLYX® product.

SX-2097 MAGNETIC White Dry Erase for GLASS SURFACES is a glossy white opaque film with a ferrous content to which magnets can stick. It is coated with a premium dry erase surface and has a silicone, pressure-sensitive adhesive for dry installs. This film is reusable. The color of the film surface that adheres to the glass is black.

This film is recommended for application to all interior glass surfaces and is perfect for decorative or architectural applicatinos where a dry erase surface with magnetic capability is desirable. It is installed using the same methods for installing films by dry application.

Priced per ft. Order the length (quantity) needed x 47" wide.
Image of our privacy levels

Privacy Level 1 - Least Private
Most Visibility, offers the least privacy

Privacy Level 2 - Semi-Private
Partial Visibility, offers semi privacy

Privacy Level 3 - More Private
Little Visibility, offers partial privacy

Privacy Level 4 - Most Private
Least Visibility, offers most privacy

Note: These privacy levels are intended as a general guide, and are based on an object being 18 inches behind the film. Viewing conditions will vary. Please request samples to determine if the film and privacy level are suitable for your application.

Privacy Guide

Image of our privacy levels

Privacy Level 1 - Least Private
Most Visibility, offers the least privacy

Privacy Level 2 - Semi-Private
Partial Visibility, offers semi privacy

Privacy Level 3 - More Private
Little Visibility, offers partial privacy

Privacy Level 4 - Most Private
Least Visibility, offers most privacy

Note: These privacy levels are intended as a general guide, and are based on an object being 18 inches behind the film. Viewing conditions will vary. Please request samples to determine if the film and privacy level are suitable for your application.


SOLYX® Decorative Window Film Installation Guide for DRY APPLY FILMS

DRY APPLY – NO WATER

1. Clean the areas to which the film is to be applied, removing all traces of dirt, dust, silicone, grime, grease, etc.

2. Remove the liner and apply the film dry, keeping the bottom of the film off the glass. Squeegee from the top working down with the squeegee supplied.

3. The Film can be cut slightly larger than the glass area to be covered. ½” overlap on either side and ½” along the bottom. This can be trimmed off at the end using the glass frame (window edge) as a guide, using the knife blade provided.
Recently Viewed
SX-2097 MAGNETIC White Dry Erase for GLASS

SX-2097 MAGNETIC White Dry Erase for GLASS

Starting At
$32.49