Download Specifications (PDF) Black vinyl film with a chalkboard-like surface. Excellent for walls in kitchens, dining rooms, living rooms, children's bedrooms, classrooms, offices and any place that could require a durable writing surface without damaging the walls. No more messy chalkboard paint! Easy to apply and remove!
Beneficial qualities include but are not limited to:
- Durable, print-receptive/chalk-receptive, 4.0mil black vinyl
- High-tack removable pressure-sensitive adhesive (with initial repositionability) designed to adhere to smooth painted wall boards (non-vinyl) and a variety of low-surface energy plastics
- Printable via UV and solvent screen, UV inkjet, UV offset, and UV & Solvent flexo
- Excellent layflat release liner properties for printing and converting
- Wipes clean with dry eraser or soft, lint-free cloth; can refresh with a damp (water), soft, lint-free cloth periodically as needed.
Order the length (quantity) x 24", 36", or 60" wide.
Privacy Level 1 - Least Private
Most Visibility, offers the least privacy
Privacy Level 2 - Semi-Private
Partial Visibility, offers semi privacy
Privacy Level 3 - More Private
Little Visibility, offers partial privacy
Privacy Level 4 - Most Private
Least Visibility, offers most privacy
Note: These privacy levels are intended as a general guide, and are based on an object being 18 inches behind the film. Viewing conditions will vary. Please request samples to determine if the film and privacy level are suitable for your application.
Privacy Guide
Privacy Level 1 - Least Private
Most Visibility, offers the least privacy
Privacy Level 2 - Semi-Private
Partial Visibility, offers semi privacy
Privacy Level 3 - More Private
Little Visibility, offers partial privacy
Privacy Level 4 - Most Private
Least Visibility, offers most privacy
Note: These privacy levels are intended as a general guide, and are based on an object being 18 inches behind the film. Viewing conditions will vary. Please request samples to determine if the film and privacy level are suitable for your application.
DRY APPLY – NO WATER
2. Remove the liner and apply the film dry, keeping the bottom of the film off the glass. Squeegee from the top working down with the squeegee supplied.
3. The Film can be cut slightly larger than the glass area to be covered. ½” overlap on either side and ½” along the bottom. This can be trimmed off at the end using the glass frame (window edge) as a guide, using the knife blade provided.
